In short: most Phoenix-area homeowners pay between $6,198 and $15,495 to resurface a pool, and Angi puts the average at about $11,363. Use the calculator below for your pool’s size, then get a written quote to confirm it.
Quick cost calculator
Enter your pool's size and the finish you're considering. The range uses published per-square-foot prices; a contractor confirms the real number on site.
Estimated cost
–
- Interior surface area
- –
- Finish, installed
- –
- Drain, clean and refill
- –
Not included: tile, coping, crack or leak repair, equipment and permits. Freeform pools: use the longest length and widest width, and expect the estimate to run high.
Get an exact quoteCost by pool volume
Many Queen Creek owners know their pool’s gallons better than its dimensions. These estimates assume a rectangular pool about twice as long as it is wide, with a 4.5 ft average depth. They cover the finish only.
| Pool | Surface | Plaster | Quartz | Pebble |
|---|---|---|---|---|
| 15,000 gal | ~850 sq ft | $5,100 – $6,800 | $6,000 – $8,500 | $6,000 – $12,800 |
| 25,000 gal | ~1,260 sq ft | $7,600 – $10,100 | $8,800 – $12,600 | $8,800 – $18,900 |
| 35,000 gal | ~1,660 sq ft | $10,000 – $13,300 | $11,600 – $16,600 | $11,600 – $24,900 |
Freeform and lagoon-style pools have more wall area for their volume, so expect them to land toward the high end.
What drives the price
- Finish: about $6 – $8 per sq ft for plaster, $7 – $10 for quartz, $7 – $15 for pebble and $8 – $30+ for tile.
- Surface prep: removing the old finish by chipping, sandblasting, hydro-blasting or chemical stripping adds labor. Ask which method your contractor plans to use.
- Repairs: cracks and leaks have to be fixed before the new finish. They’re often priced once the pool is empty.
- Drain and clean: about $600 – $650.
- Labor: Angi lists Phoenix-area resurfacing labor at about $53 – $63 an hour.
- Refill: about $40 – $400 with a garden hose over 12 – 36 hours, or $400 – $2,000 by water truck in under an hour. It’s usually not included.
Five ways to keep the cost down
- Match the finish to your plans. If you’ll sell within a few years, plaster keeps the outlay lowest.
- Bundle tile work. The pool only gets drained once, so waterline tile is easier to handle in the same job.
- Get the scope in writing. Comparing line items catches quotes that leave out prep, repairs or refill.
- Ask about timing. Contractors’ schedules and pricing can vary through the year, so ask what they have open.
- Protect the new surface. Balanced water from day one is what lets a finish reach the long end of its lifespan.
Cost per year of use
For a 25,000-gallon pool (about 1,260 sq ft), using the middle of each published price and lifespan range:
| Finish | Mid-range cost | Mid-range life | Per year |
|---|---|---|---|
| Plaster | $8,820 | 9.5 years | about $930 |
| Quartz | $10,710 | 12.5 years | about $860 |
| Pebble | $13,860 | 17.5 years | about $790 |
The Town of Queen Creek reports its tap water at 6 – 17 grains per gallon of hardness. Hard water that isn’t kept in balance shortens a finish’s life, so plan for regular water testing whichever finish you choose.
Questions
How do I find my pool’s gallons?
Check the original build paperwork or ask your pool service. You can also use the calculator’s dimensions mode with your pool’s length, width and average depth.
Does the calculator include tile and repairs?
No. It estimates the finish plus drain, clean and refill. Tile, coping, crack and leak repair, and equipment work are quoted separately after a site visit.
Is a pebble finish worth the extra cost?
If you plan to stay for many years, often yes. It costs more up front but lasts longest, which gives it the lowest cost per year in the table above.
Sources
- Angi, How much does it cost to resurface a pool in Phoenix, AZ? Average, typical range and labor rate. Checked November 2026.
- HomeGuide, How much does pool resurfacing cost? Per-square-foot rates, lifespans, prep, drain and refill costs. Checked November 2026.
- Town of Queen Creek, Water FAQ. Tap-water hardness range.